:: CHEVALIER AUTOMATIC GRINDERS ::
- 1 axis 6"x18" table
- 2 axis 6"x18" table
- 2 axis 8"x18" table
- 3 axis 8"x18" table
| DESCRIPTION |
| FSG-1628ADII |
| FSG-1632ADII |
| FSG-1640ADII |
| Table Size |
| 15 3/4" x 27 9/16" (400x700mm) |
| 15 3/4" x 31 " (400x800mm) |
| 15 3/4" x 39 3/8" (400x1000mm) |
| Max Grinding Length Longitudinal |
| 28" (710mm) |
| 32" (810mm) |
| 40" (1015mm) |
| Max Grinding Width Crosswise |
| 16" (405mm) |
| 16" (405mm) |
| 16" (405mm) |
| Max Distance from Table Surface to |
| Spindle Centerline |
| 24 3/8" (620mm) |
| 24 3/8" (620mm) |
| 24 3/8" (620mm) |
| Longitudinal Movement of Table: |
| Longitudinal Travel, Hydraulic |
| 28 3/4" (730mm) |
| 32 5/8" (829mm) |
| 41 5/16" (1050mm) |
| Maximum Travel, Manual |
| 29 1/2" (749mm) |
| 33 3/8" (847mm) |
| 43 1/4" (1100mm) |
| Table Speed, infinitely variable |
| 16-82fpm (5-25m/min) |
| 16-82fpm (5-25m/min) |
| 16-82fpm (5-25m/min) |
| Cross Transverse Travel: |
| Rapid travel, approx. |
| 60Hz 12fpm |
| 50Hz 10fpm |
| 60Hz 12fpm |
| 50Hz 10fpm |
| 60Hz 12fpm |
| 50Hz 10fpm |
| Automatic Transverse Increment |
| 1/8"-2" |
| 1/8"-2" |
| 1/8"-2" |
| Maximum Automatic Travel |
| 16" |
| 16" |
| 16" |
|
|
Note1
Note2
this is where additional content would go if it was needed --
perhaps a small discription of the information provided on this page.
