:: CNC Lathes ::
Fryer: Easy Turn Series |
|---|
Specs:
| Touch2000 Control | ET-18 |
ET-21 |
ET-24 |
| Swing Over Bed | 18" |
21" |
24" |
| Swing Over Cross Slide | 9.5" |
12" |
16" |
| Distance Between Centers | 40" |
60" |
60" |
| Optional Distance Between Centers | 60" |
40",80",120" |
40",80",120" |
| Spindle Nose | Camlock D1-6 |
Camlock D1-8 |
Camlock D1-11 |
| Spindle Bore | 2.05" |
3.15" (4.0" opt.) |
4.0" |
| Spindle Motor (continuous) | 10 hp(7.5 hp) |
15 hp(10 hp) |
15 hp(10 hp) |
27" and 30" swings available |
|||
Note1
Note2
this is where additional content would go if it was needed -- perhaps a small discription of the information provided on this page.
Note2
this is where additional content would go if it was needed -- perhaps a small discription of the information provided on this page.