::CNC Bed Mills ::
| Fryer |
|---|
MB Series
Specs:
| MB-11 | MB-14 | |
Table Travel (x axis) |
30" |
40" |
| Saddle Travel (y axis) | 20" |
20" |
| Head Travel (z axis) | 23" |
23" |
| Quill Travel | 6.0" |
6.0" |
| Table Size | 12" X 50" |
16" X 54" |
| Table Load | 1,350 lbs |
1,650 lbs |
| Spindle HP | 7.5 hp |
7.5 hp |
| Machine Weight | 5,000 lbs |
5,600 lbs |
| Operating Dimensions | 103" X 95"X96" |
113"X95"X96" |
| Shipping Dimensions | 56"X76"X82" |
60"X76"X82" |
| Speed Ranges | 2 |
|
| Tool Type Taper | CAT 40 or NST 40 or BT0 |
|
| Rapid Reverse | 200 IPM |
|
| MB-15 | MB-16 | |
Table Travel (x axis) |
50" |
60" |
| Saddle Travel (y axis) | 25" |
25" |
| Head Travel (z axis) | 24" |
24" |
| Quill Travel | 6.0" |
6.0" |
| Table Size | 17" X 63" |
18" X 70" |
| Table Load | 1,950 lbs |
1,950 lbs |
| Spindle HP | 10 hp |
10 hp |
| Machine Weight | 7,400 lbs |
8,200 lbs |
| Operating Dimensions | 160"X102"X105" |
170"X102"X105" |
| Shipping Dimensions | 68"X82"X88" |
76"X82"X88" |
| Speed Ranges | 2 |
|
| Tool Type Taper | CAT 40 or NST 40 or BT0 |
|
| Rapid Reverse | 200 IPM |
|
Up to 35" X 100" travels available
Note1
Note2
this is where additional content would go if it was needed -- perhaps a small discription of the information provided on this page.
Note2
this is where additional content would go if it was needed -- perhaps a small discription of the information provided on this page.